A tankless water heater heats water as it flows through the unit instead of storing it. You get hot water as long as the tap runs, and well-maintained units often last around twenty years, roughly twice a typical tank. The trade-off is a higher upfront cost and more involved installation.
Is your house a good fit?
- Gas supply: whole-house gas tankless units need a large burner, and the existing gas line may need upsizing
- Venting: they need their own vent, often a new run through a wall or roof
- Electric models: can require large dedicated circuits; some homes need a panel upgrade
- Winter inlet temperature: in colder regions, groundwater may arrive near 40°F, which lowers the flow rate a unit can heat
Sizing
Tankless heaters are rated in gallons per minute at a given temperature rise. The plumber adds up the fixtures you might run at once, such as two showers and a dishwasher, and matches that to the rise needed in your coldest month. An undersized unit gives lukewarm water in February even if it worked fine in August.
Maintenance
Mineral scale builds up in the heat exchanger, especially with hard water. Most manufacturers call for flushing with a descaling solution about once a year, more often above roughly 7 grains per gallon of hardness. Isolation valves installed with the unit make the flush simple.
Brightpipe Plumbing books tankless installs, conversions and annual flushes in Olean, MO.